industrial repair agent > super high temperature epoxy sealing compound repair agent

super high temperature epoxy sealing compound repair agent

BD767 super high temperature epoxy sealing compound repairing agent

Product description:
Two-component,inorganic bonding material.the A component is white(or light red) powder(125g),
the B component is translucent liquid(125g) Temperature resistance can reach to 1200℃.Used in the defect filling
and bonding of metal and ceramic under high temperature,also used in repairing of high temperature equipment
like blast furnace lining,metal solution temperature measuring probe and so on,the joint should be designed for
the socket or mosaic structure during bonding.

Mixing ratio of our BD767 super high temperature wear resistant
sealing repair epoxy compound agent:
Can adjust it between A：B＝1 : 1.5 and A:B=1.5 : 1 according to the requirements.

Curing condition:
cure at room temperature for 2～4 hours,and heat it up to the temperature of 60～80 degree and keep this temperature for 2 hours,then heat it up to the temperature of 150 degree and keep this temperature for 2 hours,after that cool it down to the room temperature slowly.

Notes：
Curing strength is low at the room temperature,if there is no heating measures,the curing time at the room temperature
is at least 5-7 days before using,although in strict accordance with the curing condition,place it for 2～4 hours at the room temperature first,then heat up to the temperature of 60～80 degree slowly and keep this temperature for 2 hours,after that heat up to the temperature of 150 degree slowly and keep this temperature for 2 hours,then cool it down to the room temperature slowly.If the production rhythm
is allowed,try to place a long time at the room temperature for heating,it helps to reduce the generation of porosity.
Avoid direct heating or too fast heating speed,the cooling speed can’t also be too fast,had better use furnace cooling.
If the condition is allowed,can separately heat up the A component to remove a small amount of water that
can absorb before using.

Operation time: 20～30 minutes.

product index:

color	density(g/cm3)	Volume(cm3)	compressive strength(MPa) GB/T1041-2008	shear strength(MPa) GB/T7124-2008	bending strength(MPa) GB9341-1999
greyish white	1.4	180	32.2	28	--

Packaging specification:
Two-component,250g/set, 16 sets/carton

Transportation storage:
Sealed storage in the cool and dry place.The warranty period is 24 months.Avoid placing it upside down,
knocking against and transporting it as a non-dangerous product during transportation.

Product packaging photo of BD767 super high temperature resistant two parts sealing compound epoxy repair agent:

------分隔线----------------------------